The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 76 1/2 Ton 4" Lift Spring Centering Pin Not Centered

**special-K** · 12-20-2011, 10:21 AM

Is the spring eye bigger or are the front cushions thinner to make up the difference to fit the same size eye? I know the sleeve/bolt size is different front to back,so you can't reverse them. Without having any to look at I was wondering if it's possible if Rough Country could have the bushings and sleeves reversed on one side. You gave the front pin to eye measurement,what's the rear? 1" different,like 25 and 26,also?

12-20-2011, 10:21 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 76 1/2 Ton 4" Lift Spring Centering Pin Not Centered Is the spring eye bigger or are the front cushions thinner to make up the difference to fit the same size eye? I know the sleeve/bolt size is different front to back,so you can't reverse them. Without having any to look at I was wondering if it's possible if Rough Country could have the bushings and sleeves reversed on one side. You gave the front pin to eye measurement,what's the rear? 1" different,like 25 and 26,also? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~