I have the mini-21 EZ-Wiring kit that I am trying to hookup. I did do several searches and found some good pointers. I am having trouble with the ignition switch hook-up. I do have a HEi distributor installed. This is for a 72 with a 350 V8.
In the kit it has the following wires marked and their colors:
- Ign Switch power - Red with black pigtail coming off the side
- Ign Switch start - purple
- Ign Switch coil - pink
- Ign Switch ACC - orange
- Ign Switch IGN - brown
On the back of the switch it has the following post:
Im a little or maybe a lot confused on getting this right. Here is what I think from the schematic:
- Acc gets the orange wire marked "Ign switch ACC"
- Bat gets the red wire marked "ign switch power"
- Ign gets the brown wire marked "Ign switch Ign"
- Not sure on the (purple wire marked "Ign switch start" and the pink wire marked " Ign switch coil" )
If I am good on the first three, where do I put the purple and pink wires ? Also what do I do with the black pigtail coming off of the red power wire?