Re: another brake pedal question
Chris, Have had similar problems with C-K trucks before. Try this, remove the caliper and carefully pump the brakes a few times. Try to get the piston out of the bore 1\2 to 3\4's of an inch, then push the piston back in. Do this a few times to each caliper. While the calipers are off lube the caliper support "O" rings in the pin holes (4) per side. Do the pump & press operation 1 side at a time. Let me know, jim
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot Jim or Paladin whichever you choose.
|