The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - what tranny should i go with for turbo ls build

BR3W CITY · 01-03-2012, 11:32 PM

is the drum for a pto or something? no idea what thats about.
For $80 at worst you'd have to swap out the tailshaft, no biggie if your already gonna build the trans up.

I had my trans built with all new insides,seals, springs etc and a hd lockup converter (28 or 3200 rpm I can't remember) for about $1500ish.
The converter was actually spec'd based on future nitrous use, but I might not actually go that direction. I was told in conversation that the setup should be good to close to 800hp without grenading.

01-03-2012, 11:32 PM	#11
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: what tranny should i go with for turbo ls build is the drum for a pto or something? no idea what thats about. For $80 at worst you'd have to swap out the tailshaft, no biggie if your already gonna build the trans up. I had my trans built with all new insides,seals, springs etc and a hd lockup converter (28 or 3200 rpm I can't remember) for about $1500ish. The converter was actually spec'd based on future nitrous use, but I might not actually go that direction. I was told in conversation that the setup should be good to close to 800hp without grenading. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD