The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**old Rusty C10** · 02-13-2012, 08:51 PM

in the old days when i did this without a hoist id undo the motor mount bolts and jack up the motor from the oil pan with a floor jack with a piece of wood on it.. then id stick a couple of chunks of wood between the motor mount on the block and its perch on the frame to give it room and was able to redo the oil pan that way... always replaced the pump while i was at it too

02-13-2012, 08:51 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,275	Re: $$$million dollar oil pan "?" in the old days when i did this without a hoist id undo the motor mount bolts and jack up the motor from the oil pan with a floor jack with a piece of wood on it.. then id stick a couple of chunks of wood between the motor mount on the block and its perch on the frame to give it room and was able to redo the oil pan that way... always replaced the pump while i was at it too __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!