Re: 67' C10 Build V8 Conversion & 700r4 trans
Did not do very much today.
Cleaned the front half of the frame some more.
Just when you think It's pretty good, It aint.
Cleaned and de-greased the frame some moe today. No-body wants to see a pic on that.
Looks like I will be on frame clean up for another day or two, until I can get it clean enough for paint.
I also replaced the Fuel Line coming off the bottom of the Cab/Gas Tank, to the ridged line that rides inside the frame to the engine.
That Old fuel line was very soft. I had about 5 gallons left in the tank, and I did not get any on my face or eye or accidentally drink any fuel, or end up wearing a few gallons.
This was a good day
It went smooth, Nice.
__________________
1967 Chevy C10 Lwb I6-250ci 3spd manual trans
Future Projects, Power Brakes, Front Discs, Power Steering, Paint Frame, New 350ci engine Bored .040 357ci Magnum, Vortec Heads, Comp XE262 Cam, Performer EPS Intake, 650CFM Carb, Rebuilt Trans 700r4, 2000-rpm stall, Completely Rebuild & Upgrade Front & Rear Suspension & Steering Components, Suspension Drop 3.5" & 5" Drop, 1.250 Sway bar,
|