hmmm. That is NOT the original rocker panel, it should be spot welded to the inner rocker across the bottom and it looks like it is either taller than the inner rocker or the inner has been trimmed up when they removed the old rocker but it looks like they drilled out the old spot welds where you see all those holes across the bottom. the front looks decent but you will see the real story once you take the rocker off. i would say just the rear half but i dont want to judge it without seeing the "a pillar". that is the lower front section of the pillar that is hiding behind the front of the rocker. It still looks better than what I started with. Surprised it isn't worse for a NYer land of the rusty trunk lid.