Re: Adapting 2008+ GM SUV Seats to Blazer
Quote:
My captain chairs brackets are a little different, they have a bend in the rear that raise the rear brackets about 3"...in addition to the mods you made to the front bracket.
|
I had to cut the back outside edge of the flanges down on the stock bracket to get it as close as I could to the floor on the passenger side. On the driver's side I didn't use any of the stock bracket because the floor geometry didn't lend itself to the bracket like the passenger side. I'll take some pics of it later and add them.
Last edited by 29od1; 03-02-2012 at 11:28 AM.
|