Re: My long term 57 project
Pic 1: Had to space the mounting holes in the bedside so they didn't align with the 3 stamped detail lines. You can also see the cross in place and the bed board trimmed to match the wheel tub contour,
Pic 2: Mounting holes transferred to tub flange. Notice new square hole in the flange that bolts to the bedwood and cross sill. If I had made the tubs 1in narrower i could have used an original hole!
Pic 3: The majority of the underside of my truck is brushed on rustoleum Regal Red.
Pic 4: Pax side in place. Added additional board under the floor so I can fasten the bed boards from below.
Pic 5: Drivers side.
|