Quote:
Originally Posted by Frizzle Fry
Thanks man. I'll give a general sequence for dressing/blending: - Grind with 4.5" grinding disc angle grinder until just above surface level
- Blend down to surface level with a 60grit flap disc (must hit the weld from both sides)
- Flatten with a file (might look flat after previous step but may still have topography)
- Dress with 60-100 grit on a DA
|
...the catch being that you must hit the weld and ONLY the weld repeatedly. No mean task for someone whose eyes are failing and hands are getting shaky!
Thanks for the DEETS, though! I'll try to follow these steps next time around!