Quote:
Originally Posted by 71blksuper4x4
...There is no way to cheaply recreate the bigger brace. Only find them used.
|
We looked at that at work last night as well and came to the same conclusion. The factory single piece design can only be produced by stamping out the part. Not easy to duplicate with typical small shop sheet metal fabrication tools.
We could make it in several pieces and weld it together but a used part from a Blazer would be less expensive.
We are looking into an alternate method of bracing the front seat mount points. What we have in mind would be quick & easy with inexpensive materials that could be installed by anybody who can install a rocker panel.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was
http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars