The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BadCompany · 03-30-2012, 04:56 AM

Found a rear bar at pull-a-part yesterday evening. Got lucky someone had already taken the rearend and just left the sway bar hanging by the end links. Got the bar, u-bolt brackets, and round spacers that go between the u-bolt bracket and plate for 28 bucks. Didnt realize the springs were closer together on a C30. I guess I will have to knock the dust off of the old tape measure today and see if it will work on my truck. If not I made the trip worthwhile by grabbing a beefy 1.25'' front bar also!! Are the u-bolt plates the same on a C30 and C10?

03-30-2012, 04:56 AM	#10
BadCompany Registered User Join Date: Sep 2010 Location: Boondox, AL Posts: 41	Re: Factory Rear Sway Bar Found a rear bar at pull-a-part yesterday evening. Got lucky someone had already taken the rearend and just left the sway bar hanging by the end links. Got the bar, u-bolt brackets, and round spacers that go between the u-bolt bracket and plate for 28 bucks. Didnt realize the springs were closer together on a C30. I guess I will have to knock the dust off of the old tape measure today and see if it will work on my truck. If not I made the trip worthwhile by grabbing a beefy 1.25'' front bar also!! Are the u-bolt plates the same on a C30 and C10?