Spent hours deciding what to do about the stereo, amp and the wiring.
I fianally decided to install a Painless auxiliary fuse panel. The install was very easy, but again, deciding the best location for the panel and wiring was a big issue.
The Vintage Air required a circuit breaker, which was in place already. The Painless panel required one, as did the Jensen amp I'm going to install. Once those issues were worked out, here's what I ended up with.
I really didn't want to drill a hole in the firewall for the wiring. I'd gone to great lengths to insulate that.
I figured that up through the floor would work great. A little modification the shifter bracket and here we are!