The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

aussie67c10 · 04-19-2012, 08:11 AM

the first job i have to do is put it up on jack stands and take the diff out . i have tubbed it to the chassis rails and i have 15x10 centre offset centerlines with a hoozier 29 x15.5 for the rear. i have to order new moser axles . i have c clip eliminator kit , diff brace ,30 spline eaton trutrack ,rear disk brake, short stroke shockers,and new lowered springs i will post pixs of the parts tommorow every thing has been in storage for 3 years. its good to see my stuff again.

04-19-2012, 08:11 AM	#2
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under the first job i have to do is put it up on jack stands and take the diff out . i have tubbed it to the chassis rails and i have 15x10 centre offset centerlines with a hoozier 29 x15.5 for the rear. i have to order new moser axles . i have c clip eliminator kit , diff brace ,30 spline eaton trutrack ,rear disk brake, short stroke shockers,and new lowered springs i will post pixs of the parts tommorow every thing has been in storage for 3 years. its good to see my stuff again.