The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jaros44sr · 04-21-2012, 09:03 AM

After talking to Meziere, seems my idea for the return water line off of the heater wont work, it has to be on the suction side of the pump. Sooo, bought a ported water pump, this should solve that problem, but, it requires a 1 3/4" inlet. To solve that problem, i contacted Griffen, and they sold me a pipe with a mandrel bent 45. We will see how that goes next week when it arrives

The port is a ORS to a -12an (3/4")

With help from guys in the engine section, installed neoprene gaskets. Never fooled with this type before, just a cork and permatex kinda guy! VCs accept a external pcv, plus a fresh air vent to the air cleaner, hidden under the cover

04-21-2012, 09:03 AM	#1802
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,438	Re: PO has me PO'd After talking to Meziere, seems my idea for the return water line off of the heater wont work, it has to be on the suction side of the pump. Sooo, bought a ported water pump, this should solve that problem, but, it requires a 1 3/4" inlet. To solve that problem, i contacted Griffen, and they sold me a pipe with a mandrel bent 45. We will see how that goes next week when it arrives The port is a ORS to a -12an (3/4") With help from guys in the engine section, installed neoprene gaskets. Never fooled with this type before, just a cork and permatex kinda guy! VCs accept a external pcv, plus a fresh air vent to the air cleaner, hidden under the cover __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-21-2012 at 09:12 AM.