[Super73]

Ahhh, doing the thrash to get it done before the 19th...

Fuel system is done, decided against the hardline.
Mounted the regulator in a different spot
-12 from cell to pump
-10 from pump to y-block before rails
-8 from y-block to rails
-4 from rails to Aeromotive regulator
-6 return to cell
(2) -4's from rails to Fuel noids.

My bloody finger tips reminded my why I hate -4 stainless braided lines.


Got the rear end filled back up with fluid.

Got the drivers header back in place (sure wish I had a new set that fit, but oh well for now). Can't put the passanger one in until I get the trans cooler lines done.

Got the old rear brake line back in place for now, want to do stainless but time is my enemy right now, so when I rewire the truck after this race, I will go stainless hard line and braided ends.

Radiator hoses done and radiator filled.



Revised my to do list:
Converter Bolts
Alternator Mounting Stud
Belt
Oil Change
2ga for batterey Cut off
Wire Fuel Pump
Extend Fan Wiring
Motor Wiring Harness
Bolt done Throttle Body and spacer
Double check N20 Noids and jetting
Bleed Brakes
Trans Cooler Lines (Make one more -6)
Headers
Wide Band
Exhaust
Cut outs
Plugs
Mount Trans Cooler
Trans Fluid
Install windshield
Front bumper (optional)
Turn Signals (optional)

Not sure if I will do the front bumper or brake lights/turn signals. There is a class for the 20th that requires them, but I don't have to run in the class, just would like to. If time permits, I will do it, If not, oh well.