Re: Make it handle
Gonna be buttoning up the front of my truck soon as well. Got my three inch drop spindles and springs and a flip kit with a 1" drop shackle So it be about a 6-7 drop on my square with the front control arms located one inch forward the rear leafs rebuilt and teflon stripped. Shock relocations front and back. New steering components and bilsteins an a one ton sway bar with heim joints on the ends. After all this a rear sway bar and panhard are in order.
Going to try -1* camber 6-7*caster and 1/8ths toe out. We will see how it goes!
Posted via Mobile Device
Last edited by INSIDIOUS '86; 05-11-2012 at 01:41 AM.
Reason: Jesus drives Chevy trucks
|