Re: help! front hubs ,02 silverado 2wd
Quote:
Originally Posted by crazy longhorn
This setup is a hub/bearing assy, bolts to the knuckle ,with 3 bolts. The rotor is a "hat", basically slips onto the hub & is retained by the wheel (no dust cap/nut /cotterpin), & yes all the brake parts are laying on the floor The hub assy (much like you see on a front drive car....but no hole for the axle), is basically seized to the knuckle. The fire stick(AKA smokewrench), will be my best buddy Both knuckles are laying on the floor, ready for the "burn"! A big ouch on the parts, but she should be good for another 170000 miles after done....crazyL
|
Well isn't that something...... I guess I am stuck in the past...lol My 98 2WD Suburban still had the old style hubs.
Did you ever get if off?
|