Quote:
Originally Posted by markeb01
That’s exactly why I used it, I've had more fun with the truck since the blitz black than I ever did when it was wearing shiny paint. I drive it everywhere now. Before I used to worry about the paint getting scratched.
I originally painted the truck in gloss black lacquer (which chips easily) nearly 15 years ago. It was my daily driver for a 72 mile commute for 9 years and we lived on a rock road, so the paint really took a beating. Due to the number of chips, and since I didn’t want to disassemble the truck to strip all the lacquer I just feather edged everything and then surfaced the bad areas with U-Pol primer (applied with a roller). I also removed all the seam sealer on the roof and resealed it with self-leveling Evercoat Maxim.
I bought two gallons of paint (just in case) and used about 5 quarts to paint the exterior. I didn’t paint inside the bed. It was either $30 a gallon or $50 a gallon. I don’t remember for sure and lost my receipts in a computer crash back in August. With all that, some thinner, Rage body filler, and sand paper I probably had another $100-$150 dollars invested when it was all done. So it cost somewhere a little over $200 for the whole job.
|
Just ran across this post while searching the forums.
My thinking is the same; I don't want it so pretty that I have to worry about every little chip.