The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

DriveLikeYaStoleIt · 06-09-2012, 09:04 PM

I decided to start up a build thread with my 49 that my father gave me. She was originally a farm truck from Nebraska. My father was the 3rd owner and I am now number 4 of course. The original truck as I remember it had a 350 4 bolt main with 327 heads. 4 on the floor trans. My father bought it over 30 years ago and so it's got a lot of sentimental value for us. During his last years living in New Orleans (approx 15 years ago), he found a "reputable" streetrod builder who told him that an early 80's front frame section would weld up and have no problems. Unfortunately he didn't talk to me before he had that all done. We had a spare set of heads stolen while it was in this guys care as well as the factory steering column. So now what I have is a 49 body on a scrap metal frame.

We recently picked up a 50 parts truck that a guy was looking to get rid of. We technically have enough parts to build 2 full trucks right now but a lot of the body parts we got have some serious cancer. The good side of the purchase is a 400ci and 700R4 transmission and a factory frame that has had a Camaro front subframe welded on. Since the guy who we bought it from was second purchaser he couldn't tell us what year Camaro it came out of. (if anyone knows of a way we can find out I would be greatly appreciative. So as of late my garage is taken up with 2 trucks and my basement is becoming a parts storage warehouse

I plan to put my truck on the other frame and work from there. We have given ourselves 1 year to at least have it in a condition to drive it up and down my street under it's own power. I'm hoping I can have it painted by then also but we shall see. All work will be done by myself and my father and/or friends who have the abilities to show me what I need to do or just turn wrenches.

I'll attach a few pics here so that you get an idea of where we are at. Sorry for the quality in advance.. Cell phone pics aren't the best always..

Pic 1 is how it was when it was brought into our family.
Pic 2 is when we got the parts truck in my garage just a side by side.
Pic 3 shows no bed on the parts truck (hood storage for now hehe).
Pic 4 shows both front ends with out the front clips on them.

-Dave

06-09-2012, 09:04 PM	#1
DriveLikeYaStoleIt Registered User Join Date: Apr 2007 Location: St. Louis, MO Posts: 14	49 3100 Build I decided to start up a build thread with my 49 that my father gave me. She was originally a farm truck from Nebraska. My father was the 3rd owner and I am now number 4 of course. The original truck as I remember it had a 350 4 bolt main with 327 heads. 4 on the floor trans. My father bought it over 30 years ago and so it's got a lot of sentimental value for us. During his last years living in New Orleans (approx 15 years ago), he found a "reputable" streetrod builder who told him that an early 80's front frame section would weld up and have no problems. Unfortunately he didn't talk to me before he had that all done. We had a spare set of heads stolen while it was in this guys care as well as the factory steering column. So now what I have is a 49 body on a scrap metal frame. We recently picked up a 50 parts truck that a guy was looking to get rid of. We technically have enough parts to build 2 full trucks right now but a lot of the body parts we got have some serious cancer. The good side of the purchase is a 400ci and 700R4 transmission and a factory frame that has had a Camaro front subframe welded on. Since the guy who we bought it from was second purchaser he couldn't tell us what year Camaro it came out of. (if anyone knows of a way we can find out I would be greatly appreciative. So as of late my garage is taken up with 2 trucks and my basement is becoming a parts storage warehouse I plan to put my truck on the other frame and work from there. We have given ourselves 1 year to at least have it in a condition to drive it up and down my street under it's own power. I'm hoping I can have it painted by then also but we shall see. All work will be done by myself and my father and/or friends who have the abilities to show me what I need to do or just turn wrenches. I'll attach a few pics here so that you get an idea of where we are at. Sorry for the quality in advance.. Cell phone pics aren't the best always.. Pic 1 is how it was when it was brought into our family. Pic 2 is when we got the parts truck in my garage just a side by side. Pic 3 shows no bed on the parts truck (hood storage for now hehe). Pic 4 shows both front ends with out the front clips on them. -Dave Attached Images Last edited by DriveLikeYaStoleIt; 06-09-2012 at 09:29 PM.