The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

losthope · 06-13-2012, 02:02 PM

heres ones i got 1963 c10 fender emblem and not sure on the years of the gmc but its the v6 hood emblem:

heres some measurements

1963 c10 has two mounting screws with a measurement of 2 3/8

gmc v6 hood emblem has a guide pin and one mounting screw measures 1 5/8 and a part number 2419879 stamped on it

then I also have a cowl extension from a 1962 c10 with measurements for the holes hooking the straight hood side to the holes is 2 7/16 and then 7 11/16

then for the first hole measuring up from the crown for the first hole closest to the hood is 1"

then the second hole closest to the door is 1 7/8

06-13-2012, 02:02 PM	#26
losthope Registered User Join Date: Apr 2010 Location: sacramento ca. Posts: 1,038	Re: Hood & fender emblems heres ones i got 1963 c10 fender emblem and not sure on the years of the gmc but its the v6 hood emblem: heres some measurements 1963 c10 has two mounting screws with a measurement of 2 3/8 gmc v6 hood emblem has a guide pin and one mounting screw measures 1 5/8 and a part number 2419879 stamped on it then I also have a cowl extension from a 1962 c10 with measurements for the holes hooking the straight hood side to the holes is 2 7/16 and then 7 11/16 then for the first hole measuring up from the crown for the first hole closest to the hood is 1" then the second hole closest to the door is 1 7/8 __________________ Timmy D. "What that grinding noise?Don't worry about that it will eventually clearance itself!" 1966 chevy c10 Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=485977 1954 ford customline H.A.M.B 54 Build Thread:http://www.jalopyjournal.com/forum/s...d.php?t=622142 Last edited by losthope; 06-13-2012 at 02:15 PM.