The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project: Tiki Express, '65 C10 Panel Truck Build

chevy_mike · 06-13-2012, 10:01 PM

Been getting some work done when I have time and motivation. Working on getting the rear suspension put together. Also figured out the slot mags I wanted to use in the rear are not going to work. They have the wrong offset to clear the fender lip, which is bigger then on trucks. I picked up a set of 15x8" stock type steel wheels which are likely going to be painted white like the roof and use center caps and likely trim rings. We'll see how they look.

Well, on to the pictures...

Wheel lip clearance with CPP 2" modular drop spindles

That's it for now...

06-13-2012, 10:01 PM	#34
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Project: Tiki Express, '65 C10 Panel Truck Build Been getting some work done when I have time and motivation. Working on getting the rear suspension put together. Also figured out the slot mags I wanted to use in the rear are not going to work. They have the wrong offset to clear the fender lip, which is bigger then on trucks. I picked up a set of 15x8" stock type steel wheels which are likely going to be painted white like the roof and use center caps and likely trim rings. We'll see how they look. Well, on to the pictures... Wheel lip clearance with CPP 2" modular drop spindles That's it for now... __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...