Hey Matt
aboard from NC....you are on the right track....
ball joints (upper and lower)
control arm shafts (upper and lower)
Tie rods (inner and outer)
adjusting sleeves
idler arm
pitman arm
rag joint (if yours is eaten up)
If you don't have one, I'd install a sway bar too
Check your local auto parts stores for pricing...I've also found that Amazon, Rockauto.com, etc sometimes have better prices for same parts including shipping....
I'd also recommend using high quality parts as well...good luck and have fun!
be sure to get an alignment done once you are done with the remove/ replace