The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

neonlarry · 10-01-2003, 06:40 PM

Its more than likely that the wire that runs across to that pin under the seat is bent not allowing the pin to engage. Just look under the seat and see where that wire runs from the seat latch to the other side and you will see where it engages the right side rail. It doesn't take much for that not to engage.

10-01-2003, 06:40 PM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Its more than likely that the wire that runs across to that pin under the seat is bent not allowing the pin to engage. Just look under the seat and see where that wire runs from the seat latch to the other side and you will see where it engages the right side rail. It doesn't take much for that not to engage. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI