|
Re: "TANGERINE" (C20 to K10) (LWB to SWB) (CST/MOD) (5.3)
Quote:
Originally Posted by fakerwade
...And in further news,,, My project will be put on hold for a while. The HOT weather has finally hit the valley and working in a shop with no a/c for forty hours a week is no fun. Working on Tangerine 16 to 24 hours on the weekend in the same shop sounds like even less fun. It's not uncommon for our valley temps to exceed 120 deg. So I think I'll take a break, put the boat in the water and let my finances re-build a little! We'll hit again this fall!
|
Wimp 
I don't blame you one bit. It is even hotter inside a non-A/C building than it is outside where you at least get the cooling effect of the wind and can find some shade to cool off. Industrial buildings are usually fully exposed to the sun all day long and heat soak horribly staying hot well into the evening after the sun goes down. Not fun at all.
Have fun with the boat this summer.
Maybe you can talk the boss into getting some A/C for the shop
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577
69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been
69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc
68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E
79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars
|