Working on cooling system, again! Removed 1 1/2" outlet, fit 1 3/4" into rad. Griffin Rads. sent me another piece of mandrel bent 45 to fit in place of the rubber hose....
Went behind the counter at advance auto and searched their supply of hose and came up with this. Just cut off the 10" with the 90 in it, shame the 45 was facing the wrong way, or it would have bolted right up to my lower outlet.
Also, have to flush out all the grinding debris from the rad, probably will ruin seals in the water pump if i dont get it all out, my luck!
Still wondering if i should notch out more where the factory notch is....