The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Help with fuel system design for LS1 install

BR3W CITY · 07-19-2012, 01:31 PM

I'm using a fuel injection compatible in line filter, iirc its an Earl's. It uses regular -6 AN, no need for PTC except for at the rail. Feed is 3/8, return is 5/16.

pump->filter->engine. You can run a pre-filter, but it needs to have high enough flow to not cause issues with suction. I personally don't/.

07-19-2012, 01:31 PM	#33
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Help with fuel system design for LS1 install I'm using a fuel injection compatible in line filter, iirc its an Earl's. It uses regular -6 AN, no need for PTC except for at the rail. Feed is 3/8, return is 5/16. pump->filter->engine. You can run a pre-filter, but it needs to have high enough flow to not cause issues with suction. I personally don't/. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD