The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Adapting throttle rod to new carburetor...

**COBALT** · 10-06-2003, 02:31 PM

Yep. I could have fabbed something up, but I got the whole thing to see what part I could use. Turns out the bushing was perfectly sized (in thickness) to fit inside the throttle linkage. Only the rod was too thick, so I had to open the hole. Once that was done it worked perfectly.

10-06-2003, 02:31 PM	#4
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Yep. I could have fabbed something up, but I got the whole thing to see what part I could use. Turns out the bushing was perfectly sized (in thickness) to fit inside the throttle linkage. Only the rod was too thick, so I had to open the hole. Once that was done it worked perfectly. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.