The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1972 Chevy 4wd Longhorn Project: Never Ending Changes

**Dieselwrencher** · 08-05-2012, 11:12 PM

Here's some progress guys! I got the RH frame rail support made, I smoothed out where I had to clearance the frame for the primary turbo, and got the front portion of the frame ready for paint. Then I painted it with POR-15 gloss black.

I also got my shipment from DIY4X which had my RH spring mount for the D60. I put it on, but have to heli-coil the housing as one hole is stripped out.

08-05-2012, 11:12 PM	#1029
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Finally starting my Longhorn 4x4 conversion Here's some progress guys! I got the RH frame rail support made, I smoothed out where I had to clearance the frame for the primary turbo, and got the front portion of the frame ready for paint. Then I painted it with POR-15 gloss black. I also got my shipment from DIY4X which had my RH spring mount for the D60. I put it on, but have to heli-coil the housing as one hole is stripped out. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 08-05-2012 at 11:20 PM.