Re: Make it handle
The goal is to get the links parallel to the line of travel. In these trucks, thats basically straight up and down. If your within 10* you'll be OK. If you have bigger angles, the forces start to push/pull the sway bar either forward/backward or sideways, this is a loss of sway bar efficiency. Also, baig bars will tend to snap the end links if the alaignment of the links is too far off.
__________________
GoodGuys 2012 Pro-Truck Champion
2012 Truckin' Throwdown Champion
GoodGuys 2011 National Champion
2011 Truckin' Throwdown Champion
GoodGuys 2010 National Champion
Proud to put our products up against all others!
|