The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

SBTork · 08-18-2012, 04:15 PM

SLAM IT!!!

If it were mine, I would do spindles and springs up front, just keep your old stuff incase you want to go back. It's a very simple swap. Then just lowering springs the rear, I think you can lower these 4-5 inches w/o needing a notch. That and add some air shocks so you can adjust as need w/o having something permanent bolted/welded to the frame.

08-18-2012, 04:15 PM	#5
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,856	Re: To Lower or Not To Lower SLAM IT!!! If it were mine, I would do spindles and springs up front, just keep your old stuff incase you want to go back. It's a very simple swap. Then just lowering springs the rear, I think you can lower these 4-5 inches w/o needing a notch. That and add some air shocks so you can adjust as need w/o having something permanent bolted/welded to the frame. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD..... Last edited by SBTork; 08-18-2012 at 04:16 PM. Reason: forgot stuff