|
Re: Windshield gasket blues: Precision supplies Steele and possibly Soff Seal
Just finished installing all new precision seals (rear window, doors, wing windows and windshield). All went well. I did soak the windshield gasket in hot water for about 2 hours prior to installing that (around 62f outside). Didn't use any lubes or sealers. The last two pics show a slight pucker in bother outside corners but that will relax. After it relaxes a bit I will put a butyl rubber sealant from the top corner to the cowl. If these trucks leak that is the area it will usually come from.
|