The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Low Elco · 10-15-2012, 08:34 AM

Ha, how 'bout that sticky stuff! Nasty to put on, but it is soo worth it when you get done! Wait till today, when you can handle it! All the work looks pretty good, it'll surprise you when you get the primer on it! "I thought it was straight!" Scrub that dude down with 150 and blast it with 2 good coats of slick sand. Block with 150, and you'll be shocked at the lumps and bumps that show up. I'd also recommend the 3M Rub on guide coat. Kind of a powder that goes on with a pad, and doesnt clog your paper and really shows stuff well. A little expensive but worth it!

10-15-2012, 08:34 AM	#23
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: My '67 Fleetside C10 renew Ha, how 'bout that sticky stuff! Nasty to put on, but it is soo worth it when you get done! Wait till today, when you can handle it! All the work looks pretty good, it'll surprise you when you get the primer on it! "I thought it was straight!" Scrub that dude down with 150 and blast it with 2 good coats of slick sand. Block with 150, and you'll be shocked at the lumps and bumps that show up. I'd also recommend the 3M Rub on guide coat. Kind of a powder that goes on with a pad, and doesnt clog your paper and really shows stuff well. A little expensive but worth it! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!