The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Goats86 · 10-22-2012, 06:33 PM

Hi Rob, Thanks for the reply. I am running stock rally wheels all the way around. 7 inch front and 8 inch rear. As of now it runs pretty flat thru the corners. Seems to have a bit of a push in the corner but not too bad. Using urethane bushings all the way around. I removed all but 3 leafs in the rear. Those left I shortened 4 inches and prepped with teflon pads. Has a Helwig rear sway bar stock 1/2 ton up front. Cheapy Monroe shocks. The rear end is a narrowed Ford 8.8( I know but it got me posi and disc for cheap)

10-22-2012, 06:33 PM	#1431
Goats86 Registered User Join Date: Dec 2010 Location: Waxahachie, Texas Posts: 144	Re: Make it handle Hi Rob, Thanks for the reply. I am running stock rally wheels all the way around. 7 inch front and 8 inch rear. As of now it runs pretty flat thru the corners. Seems to have a bit of a push in the corner but not too bad. Using urethane bushings all the way around. I removed all but 3 leafs in the rear. Those left I shortened 4 inches and prepped with teflon pads. Has a Helwig rear sway bar stock 1/2 ton up front. Cheapy Monroe shocks. The rear end is a narrowed Ford 8.8( I know but it got me posi and disc for cheap)