The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kev2809** · 11-05-2012, 06:11 PM

k..on my way to lowes in a few...im gonna drill 9/16" holes in the floor and bolt them directly to the floor with no spacers. im going to use large flat flashers on each side to re enforce it. 2 1/2" in length, 1/2" grade 8 bolts should be good? i wanna use slightly smaller bolts to leave me some adjustablility in case i screw up the location of the holes.

11-05-2012, 06:11 PM	#9
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,136	Re: 99/06 Seat mounting! k..on my way to lowes in a few...im gonna drill 9/16" holes in the floor and bolt them directly to the floor with no spacers. im going to use large flat flashers on each side to re enforce it. 2 1/2" in length, 1/2" grade 8 bolts should be good? i wanna use slightly smaller bolts to leave me some adjustablility in case i screw up the location of the holes. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]