The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

motorcritter · 12-02-2012, 11:03 PM

I'm not so familiar with what will exchange with the 1/2 ton stuff- if all I need are 1/2 SB springs and spindles/hubs/calipers, it might be worthwhile. If there's a big difference/headache trying to make it work, I'll pass for now. At least for this truck- the cab and bed are spotless, and I just did an engine install on a '79 that could use some reskinning. And the 454/TH400 combo in the donor is 'icing on the cake'.

Thanks, hugger663, but it looks like I need even more info.
Posted via Mobile Device

12-02-2012, 11:03 PM	#3
motorcritter Registered User Join Date: Mar 2012 Location: Boulder, CO Posts: 350	Re: Crossmember swap questions... I'm not so familiar with what will exchange with the 1/2 ton stuff- if all I need are 1/2 SB springs and spindles/hubs/calipers, it might be worthwhile. If there's a big difference/headache trying to make it work, I'll pass for now. At least for this truck- the cab and bed are spotless, and I just did an engine install on a '79 that could use some reskinning. And the 454/TH400 combo in the donor is 'icing on the cake'. Thanks, hugger663, but it looks like I need even more info. Posted via Mobile Device