More pics-
Two pieces become one
![](http://i1292.photobucket.com/albums/b575/wilcoxgarage/400f0a53c7cd2d2988c7ce8631a3b054_zpscf794c43.jpg)
Close up of weld joint
![](http://i1292.photobucket.com/albums/b575/wilcoxgarage/7d0dd7d424c0a943d239b7f5b60894bb_zpsec9e13f3.jpg)
Folding the edge. Done with a small crescent wrench. I just open the jaws as much as necessary to easily slip onto the metal,figure out the depth I want, and wrap some tape around the jaws at that depth and bend a few degrees per pass. Takes 4 or 5 passes for a 90 degree bend.
![](http://i1292.photobucket.com/albums/b575/wilcoxgarage/926421cfd527c4cfa81fe08730f946fb_zps5cc25617.jpg)
Adding the other pieces. Here you can see the weld seams.
Posted via Mobile Device
Posted via Mobile Device