|
Re: stepside custom tail lights
I bought LED lights and Frenching cups from a Zephyr. I built the bracket and welded a cover to the open side of the cup. I filled the outside edges with Bondo to make them smooth. They'd be done but I moved them lower and had to weld the bracket holes so I can re-drill them in different spots. I have a LED 3rd brake light over the license plate so the rear of Toad will light up real nice. BTW, I will remove the trailer lights when the LED's are rocking and rolling
__________________
If your strength is small, don't carry heavy burdens. If your words are worthless, don't give advice. Chinese Proverb 
|