Re: 49/54 LS driver
Bluejeep- for the thermostat housing I used a 90 degree swiveling one for a regular small block chevy. It had an o-ring seal so I trimmed down a camaro thermostat just a little to fit the inner dimension. Slotted the holes ever so slightly and made offset bushing to go in the mounting holes.
The steam port I drilled and tapped the top of the water pump.
The air intake was a kit from ebay for a tahoe. 50 bucks worth of pieces to make something better later. Pics tommorrow if I don't forget.
Posted via Mobile Device
|