Now that the exhaust is removed from the steel floor of the bed, I can pull the bed. Let me tell you - this sumbeach is heavy! I was able to remove it, and list it on Craigslist and sell it by that evening. Nice, right?
Here is my frame.
Make note of the tank and compressors. They will be moved later.
Here is the bed removed. Note the small bed notch.
Here is me test fitting the new bed
Due to the way my trailing arms were made around the old bed, I had to remove the frame supports on the steps. I will address these later.
I will probably be cutting this out in the midst of the build so that I can fit some fatter rubber in preparation for bigger HP numbers.