|
Re: 56 Cameo build
Got the fuel pump, fuel filler, and fuel sender unit in and the tank installed. Rear brake lines and rear shocks done. Set the pinion angle and measured for the driveshaft (53"). Then we can get the exhaust installed. Need to mount the filter/regulator and run fuel lines. Got an ignition switch to mount in the dash so that will be most of the basic wiring figured out except for the instrument panel. Still waiting on a couple of fittings to finish up the a/c condensor and drier install.
Decided to weld 2 4" elbows together and put air cleaner above the engine. Will have pictures later if we can make it work!
tbrown
|