Thread
:
'55 International Metal/Body/Paint Work
View Single Post
02-08-2013, 10:19 AM
#
167
theastronaut
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,870
Re: '55 International Metal/Body/Paint Work
I welded the floor in and ground the plug welds down flush, all 210-220 of them. Then I primed the top and bottom with more DPLF.
After the epoxy dried for a day I masked the side seams, scuffed them, then applied SEM two part seam sealer.
The reason I shot the second coat of epoxy after welding the floor in was to cover the welded areas, and also to get the seam and edge of the bedside coated under the seam sealer.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build
'65 C10 Highly Detailed Stock Restoration Thread
'78 Camaro Targa Roof Build
'55 International Metal/Body/Paint Work
'66 F100 Full Rotisserie Restoration
'40 Packard 120 Convertible Coupe Restoration
How To Restore and Detail an Original Gauge Cluster
How To Detail Sand Body Panels, Edges, Corners, Etc
theastronaut
View Public Profile
Find More Posts by theastronaut