Quote:
Originally Posted by markeb01
If you go back to the yard you might also want to check for windshield washer nozzles. They are easily overlooked, but valuable if you want a pair and don’t have any. They are shown in the upper left corner below:
|
Thanks Mark, I actually have the nozzles, pump etc., the jar and bracket were not present when I bought the truck. The bracket I got was the one fastened to the rad support by the horn, and horn relay.
Quote:
Originally Posted by Captainfab
X3 on the PS pump being for a long water pump. To expand on that some, you will also need heads with the accessory holes to correctly mount that pump and brackets.
All trucks '72 and earlier originally were equipped with short water pumps.
|
okay, so this is where I am struggling a bit on the PS. I have the GM 350 crate engine (73-85), and I have a short water pump. Hoses are the least of my worries, I make and sell custom hoses for a living. There is precious little in the yards in southern ontario in the way of 80s vehicles, nevermind 70s... 60s, forget about it. That 66 truck above is the only 60s vehicle I have seen in a yard around here. If they cant make a buck in a short period of time they crush em.
I see that brothers has a bracket kit
http://www.brotherstrucks.com/prodin...number=PSPB766
expensive though, $59.99, but I may have to bite the bullet.
Has anyone used this bracket?