Re: 1967 Mustang Coupe Build (Electra)
Well i decided since POR-15 was on the way and i didnt have Physical Therapy today I would get out and do some work. I wire wheel the whole trunk, found a few small holes and patched them up. I think cleaned and put a good coat of POR-15 on. I used a lil over half a quart on the first coat and will use the rest of it to finish the trunk tomorrow
Wire wheeled the passenger side floor panel and it has a lot of small holes in it. Its still pretty solid but i may just cut out and patch the passenger side floor panel. Still need to wire wheel the driver side.
|