|
Re: Converting coil style ignition to HEI........what is involved?
But as mr48 chev says, you may want to upgrade your wiring leading to your dist. Mine is a pretty heavy wire, but it goes through my ignition switch which eventually possibly shorten the life of the ignition switch. With your original setup of points and condenser, a little wire did the trick, but with an HEI, it's hungry for 12 volts so a full 12 volts is needed to give you the full advantage of an ass kicking spark at the plug. ; )
So back to the relay idea! Dave chapman can help you out there! He's an expert at relays and makes them.
Posted via Mobile Device
|