The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What will they adjust to fix this alignment problem?

**Boog** · 04-07-2013, 11:16 AM

If you do add or remove shims to the upper control arm shaft be sure to adjust the toe in also. As you move the upper control arm inward or outward the toe in changes also so you have to keep check on that as well.
A visit to a front end shop will put it back on the numbers but you can get it close by using a tape measure and carpenters level.

04-07-2013, 11:16 AM	#6
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,015	Re: What will they adjust to fix this alignment problem? If you do add or remove shims to the upper control arm shaft be sure to adjust the toe in also. As you move the upper control arm inward or outward the toe in changes also so you have to keep check on that as well. A visit to a front end shop will put it back on the numbers but you can get it close by using a tape measure and carpenters level. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross