Got a full day to paint the frame. It had just rained so figured there was a good bit of humidity in the air.
Though painting with a brush took a good amount of time and the runs were unavoidable, it turned out pretty good and coverage was not an issue. I used
2 quarts for 2 coats on the frame, core support and trans crossmember. I still had a little left over for misc parts. Next I will lightly sand, prime and coat
with topcoat. It's worth mentioning that it's really hard to get a good second coat as glossy black on black makes it impossible to know what has been covered.
To do it over again I would do silver for first coat and black for second. Then let dry prime and do final topcoat.
while waiting for the first coat to dry I worked a little on the old gas inlet to the cab. I por15'd the vent areas as well since I will be welding those holes up.