The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

NoNeck · 05-06-2013, 08:22 PM

Oh, by the way... the stock pushrod will not insert into the CPP booster with that big circular metal thing on the end. The rubber shroud inside the hole is different from the original one. You can see the original rubber "washer" that slides into the factory booster still hanging on the pushrod "A" in my photos.

I was using the longer Wilwood pushrod "B" with the spacer when the M/C didn't want to slide on the CPP booster as stated above.

POP

05-06-2013, 08:22 PM	#38
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,106	Re: Wilwood Master Cyl question Oh, by the way... the stock pushrod will not insert into the CPP booster with that big circular metal thing on the end. The rubber shroud inside the hole is different from the original one. You can see the original rubber "washer" that slides into the factory booster still hanging on the pushrod "A" in my photos. I was using the longer Wilwood pushrod "B" with the spacer when the M/C didn't want to slide on the CPP booster as stated above. POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.