The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 05-15-2013, 05:44 PM

I would take it all out. If it's not going to be used then it's a matter of a few more bolts and all the inside stuff will fall in the floor.But if u leave it buy some rubber vacum close offs and put over the ends of copper tubes. They are in the help section at most auto parts stores.[/COLOR][/B]

05-15-2013, 05:44 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,943	Re: help I would take it all out. If it's not going to be used then it's a matter of a few more bolts and all the inside stuff will fall in the floor.But if u leave it buy some rubber vacum close offs and put over the ends of copper tubes. They are in the help section at most auto parts stores.[/COLOR][/B] __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.