|
Re: Please help me with sequence of front sheet metal install.
Quote:
Originally Posted by D.PASSMORE
My technique: First align doors in cab frame, then set the cab, set bed to line up with cab. Then loosely bolt down core support, fenders. This is where it gets touchy on front clip - set spacers as needed / tighten bolts, but not real tight. Once you get decent fit, mount hood and adjust again. tighten in small increments. Last fender wells.
|
x 2 it is not as hard to get it all lined up w/o the inners in there imo good luck and dont scratch it up
__________________
California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project
|